Discussion starter: a local SEO question, posted with an answer from Niraj Raut to open the thread. If you have dealt with this on a site, reply with what you saw, especially where it differs.
- Local SEO
Service-area plumbers with no storefront: do suburb landing pages still work for 30 suburbs, or do they now read as doorway pages?
Disclosure: Niraj Raut, who posted this answer, runs the SEO consultancy linked at the end of it.
1 reply
-
adminAdmin
Suburb pages can still work for a service-area plumber, but 30 pages that differ only by the suburb name are close to the textbook example of what Google’s doorway policy describes. The page count is not the problem. Whether each page contains something true about that suburb that a customer there would find useful is the problem. For most plumbers with no storefront, the better structure is fewer pages: a handful of genuinely local pages for the suburbs that produce real work, a few regional pages grouping the rest, and one clear service-area page listing everywhere you go.
It also helps to be clear about what suburb pages can and cannot do. They compete in the organic results. They do very little for the map pack, where a service-area business is mostly limited by proximity to its verified (hidden) address. A plumber hoping 30 pages will put them in the map pack in 30 suburbs is solving the wrong problem.
What Google’s doorway policy actually targets
Google’s spam policies define doorway abuse as “when sites or pages are created to rank for specific, similar search queries.” The examples include pages targeted at specific regions or cities that funnel users to one page, and substantially similar pages that are closer to search results than a clearly defined, browseable hierarchy.
Read that carefully and the test is about purpose and substance, not about the existence of location pages. A page for “blocked drains Scarborough” is not a doorway because it names a suburb. It becomes one when its only job is to catch that query and push the visitor to the same phone number and generic copy they would have found on every other page.
The same policy page describes scaled content abuse as “when many pages are generated for the primary purpose of manipulating search rankings and not helping users”, “no matter how it’s created”. AI-written suburb pages sit squarely in that territory when the only real input is a list of suburb names.
The practical test:
Delete the suburb name from the page. If what remains could be pasted onto any other suburb page without a reader noticing, it is a doorway pattern, however well written it is.
What usually happens to thin suburb pages
A manual action for doorway pages is possible, but for a small trade site it is not the most likely outcome. More commonly, going by what local SEO practitioners report, Google simply does not use the pages. That shows up in Search Console in a few recognisable ways:
- Suburb pages sitting in “Crawled - currently not indexed” or “Duplicate, Google chose different canonical than user” in the Page indexing report. The second label is especially telling: Google has decided two of your suburb pages are the same page.
- Pages that are indexed but earn almost no impressions, even for their own suburb queries.
- The home page or a single service page ranking for the suburb queries instead of the dedicated page.
That quiet failure costs more than it seems. The time spent writing 30 near-identical pages could have gone into the five pages that would have ranked, and a site that is mostly template pages gives Google less reason to trust the pages that matter.
Organic pages versus the map pack
These two surfaces work differently, and mixing them up leads to bad decisions.
Surface What mostly drives it What suburb pages change Map pack / Google Maps Google’s help documentation names relevance, distance and prominence. For a service-area business, distance is generally assessed from the verified business location, even when the address is hidden (a long-standing practitioner observation rather than something Google spells out). Very little directly. Practitioners have tested whether the service areas listed in a Business Profile change rankings and generally report that they do not. Organic results Page relevance, quality, links and site-level trust, competing against directories, aggregators and other trades This is where a genuinely local page can win suburb queries outside your map-pack radius Two Business Profile details matter here. Google allows up to 20 service areas, and says the overall boundary “shouldn’t be more than about 2 hours of driving time from where your business is based”. A plumber covering 30 suburbs will usually list broader areas (a city or region) rather than 30 individual suburbs. And if you do not serve customers at your address, Google says to remove it from the profile. None of this makes the website pages redundant. It just means the website carries the organic job and the profile carries the map job.
What makes a suburb page a real location page
A plumber has more genuinely local material than most businesses. The difficulty is collecting it, not finding it. Material that actually differs by suburb:
- Jobs actually done there. Short write-ups with photos: the problem, the cause and the fix. “Tree roots in a 1960s clay sewer line off a quiet street in the northern part of the suburb” is local; “we fix blocked drains fast” is not.
- Housing stock and infrastructure. The era of most homes, typical pipe materials, known problems with older hot water systems, water pressure issues or hard water in particular areas. This is the kind of information a homeowner cannot easily get elsewhere.
- Reviews from customers in that suburb. Quoted with permission and consistent with what appears on the Business Profile.
- Real response times and coverage. Honest after-hours availability and typical arrival windows from where the vans are based.
- Local rules that affect the job. Council, water utility or strata requirements, where they genuinely differ between areas.
- Licence and insurance details. Not local, but they belong on every page a customer might land on.
If you cannot list at least a few of these for a suburb, that suburb does not yet have enough material for its own page. It belongs on a regional page until the job history catches up.
A tiered structure for 30 suburbs
Hypothetical example:
A two-van plumbing business serves 30 suburbs. The job management system shows eight suburbs produce most of the work, twelve produce a steady trickle, and ten produce a job every month or two.
- Tier 1 (8 suburbs): dedicated pages, each with job write-ups, photos, local reviews and specific housing-stock notes. These are the pages worth link-building and internal linking.
- Tier 2 (12 suburbs): three regional pages (“northern suburbs”, and so on), each naming its suburbs and covering what they share, with a few job examples from across the group.
- Tier 3 (10 suburbs): listed on the main service-area page, with no dedicated URL until job volume justifies one.
The site ends up with roughly 12 location URLs instead of 30, and every one of them has something to say.
The tiers should move. When a Tier 2 suburb builds up enough jobs, reviews and photos, it earns its own page. That also gives the business a sustainable content process: every notable job becomes material for a location page, instead of an annual push to write 30 pages at once.
Where the answer changes
The right structure depends on the business, not on a rule about page counts.
Situation Lean towards more suburb pages Lean towards fewer, grouped pages Job history Hundreds of jobs a year spread across many suburbs, with photos Work concentrated in a few suburbs Local variation Suburbs differ in housing era, infrastructure or regulations Suburbs are similar and the service is identical Competition Suburb queries show other local trades ranking with dedicated pages Results are dominated by directories and the map pack Content resources Someone can gather job notes and photos from the vans every week Pages would be written once and never touched again Site size A substantial site where location pages are a minority of URLs A 10-page site where 30 location pages would be most of the site How to check your existing pages and test changes
- Check indexing. Put the location pages in their own XML sitemap so the Page indexing report can be filtered to them. Count how many are indexed, and how many show “Duplicate, Google chose different canonical than user” or “Crawled - currently not indexed”.
- Check query match. In the Performance report, filter to each suburb page and look at its queries. A page that earns impressions mainly for its own suburb and service combinations is doing its job. A page with no impressions after several months is not.
- Tie pages to jobs. Use call tracking by landing page, and compare it against job addresses in your job management or CRM system. Ranking for a suburb that produces no calls is not a win.
- Test before rebuilding everything. Pick a group of suburbs with similar job volume. Rebuild half the pages with genuine local material and leave the matched half as they are. Compare indexing, impressions for suburb queries, and calls from those suburbs over three to six months (local sites have low volumes, so short tests will mostly show noise).
What would change the decision? If the rebuilt pages are indexed and start earning suburb-query impressions while the controls stay flat, the evidence supports investing in more Tier 1 pages. If both groups behave the same, the constraint is probably elsewhere (links, reviews, overall site trust, or strong directories), and more location content is not the next best use of time. If consolidating thin pages into regional pages causes no loss in calls, you have removed risk at no cost.
Watch for this:
When consolidating, 301 redirect each retired suburb URL to the regional page that now covers it, and update internal links. Deleting pages and leaving 404s throws away whatever links and history they had.
The decision rule
Build a suburb page only when you can fill it with things that are only true of your work in that suburb: jobs, photos, reviews and local conditions. Group everything else into regional pages and one honest service-area page. For a typical plumber with 30 suburbs, that often means somewhere between 5 and 15 location URLs rather than 30. Start by checking how many of your existing suburb pages Google has actually indexed. That number usually settles the argument faster than any debate about doorway policy.
Need help with this on your own site?
Niraj Raut works with businesses in Nepal, Australia, the UK, Europe and the US on technical SEO, ecommerce SEO, local SEO and AI search.
Add a reply Cancel reply
Replies are open to approved members. Log in or apply to join.